Montana Vinyl Cutting ©

Montana Leather Stamps © are endorsed by:
Trail Master Holsters

Vollkommen Laser ©


Custom Design Requests

New product line! Click Here!

If you don't see the design you want, here is where you can get it made.

Here is how it works.

  1. Send me an image of what you want. If you want a leather stamp, please include the size of the stamp block you want it on.
  2. I will evaluate your image and size request and let you know what I can do with it.
  3. If step 2 above is satisfactory for you, I will do a 3D CAD design and send you an image of the design.
  4. If you are happy with step 3, I will make one and send you an image of the result.
  5. If you are happy with step 4, I will send you a PayPal invoice.
  6. Once the invoice is paid, I will ship it to you by USPS Priority flat rate mail.

What does a custom design cost?

  • If you are requesting a leather stamp, there is a charge based upon the size of the stamp block.
  • If it is an epoxy inlay coaster, there is a fixed price for the pine disk.
  • If the design, either stamp or coaster, is something I think will sell to others there is no design charge. (my decision)
  • If I don't think it is marketable to other than you there is a design charge based upon its complexity.
  • Then there is an $8.00 shipping charge.
  • Quantity discounts can be negotiated.

Price List:

  • Leather stamps
    • .75x1"           $18
    • .75x1.5"        $22
    • 1x1"                $20
    • 1x1.5"            $30
    • 1.5x1.5"        $40
    • 2x1.5"            $45
    • 2x2"                $50
    • 2" dia.            $45
  • Coasters
    • Pine                $15
    • Other    negotiable
  • Design charges
    • Something I can sell on this site  -  Free
    • Simple  -   $10
    • Complex    depends, but probably around  -  $20

Leather stamp blocks are made from Delrin. Some people call it plastic, and it is, but it is a very tough plastic. Here is a paper I wrote on Delrin. It should be enlightening if you don't already know about it.

If you are ready for me to make you a custom design, email me at:

New product line!

High Definition laser cut leather stamps!

December 2018 - Cutting leather stamps with a laser gives and HD advantage to your custom stamp/maker's mark.

I make a lot of stamps using an end mill, and they work quite well. But resolution of the stamp is limited to the diameter of the end mill bit. In this case 0.025". On a small stamp it is often necessary to simplify the stamp to make it work.

The focused beam diameter on my industrial cutting laser is 0.004". The power necessary to cut the stamp is <1/3rd the total power available. It takes more time to design the stamp, but the time it takes the laser to cut the stamp is 1/10th of what it takes to cut using an end mill.

Here is an example of a custom designed HD Laser cut stamp. It is cut into a 2" square stamp block. Note that the stars are properly formed and that if this same stamp was cut using an end mill, the stars would be oversized dots  with no points.

So what do they cost? The same as a mill cut leather stamp. And that is mostly based upon the cost of the bar stock that the stamp is made from. Yes, the laser costs 5 times more than the end mill, but that is an intangible cost to the end product.


What can I make for you?